,

4 Axis Arduino CNC shield


Compare

4 Axis Arduino CNC shield In Pakistan

Grbl (Arduino G-Code Processor)

Without drivers.

The Arduino CNC Shield makes it easy to get your CNC projects up and running in a few hours. It uses opensource firmware on Arduino to control 4 stepper motors using 4 A4988 Stepper drivers,

or

DRV8825 DRIVER

with this shield and the Arduino, you can build all kinds of robotics or CNC projects including CNC routers, laser cutters, and even pick&place machines.

 180.0

4 Axis Arduino CNC shield In Pakistan

Grbl (Arduino G-Code Processor)(4 Axis Arduino CNC shield)

Without drivers.

The Arduino CNC Shield makes it easy to get your CNC projects up and running in a few hours. It uses opensource firmware on Arduino to control 4 stepper motors using 4 A4988 Stepper drivers,

or

DRV8825 DRIVER

with this shield and the Arduino, you can build all kinds of robotics or CNC projects including CNC routers, laser cutters, and even pick&place machines.4 Axis Arduino CNC shield.

Features

  • GRBL 0.8c compatible. (Open source firmware that runs on an Arduino UNO that turns G-code commands into stepper signalshttps://github.com/grbl/grbl)
  • 4-Axis support (X, Y, Z , A-Can duplicate X,Y,Z or do a full 4th axis with custom firmware using pins D12 and D13)
  • 2 x End stops for each axis (6 in total)
  • Spindle enable and direction
  • Coolant enable
  • Uses removable Pololu A4988 compatible stepper drivers. (A4988, DRV8825, and others)
  • Jumpers to set the Micro-Stepping for the stepper drivers. (Some drivers like the DRV8825 can do up to 1/32 micro-stepping )
  • Compact design.
  • Stepper Motors can be connected to 4 pin Molex connectors.
  • Runs on 12-36V DC. (At the moment only the Pololu DRV8825 drivers can handle up to 36V so please consider the operation voltage when powering the board.)
  • 4 Axis Arduino CNC shield
    4 Axis Arduino CNC shield
  • GRBL 0.8c compatible. 
  • 4-Axis support (X, Y, Z , A-Can duplicate X,Y,Z or do a full 4th axis with custom firmware using pins D12 and D13)
  • 2 x End stops for each axis (6 in total)
  • Spindle enable and direction
  • Coolant enable
  • Uses removable Pololu A4988 compatible stepper drivers. (A4988, DRV8825, and others)
  • Jumpers to set the Micro-Stepping for the stepper drivers. (Some drivers like the DRV8825 can do up to 1/32 micro-stepping )
  • Compact design.
  • Stepper Motors can be connected to 4 pin Molex connectors.
  • Runs on 12-36V DC. (At the moment only the Pololu DRV8825 drivers can handle up to 36V so please consider the operation voltage when powering the board.)

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “4 Axis Arduino CNC shield”

There are no reviews yet.