-15%
,

Arduino LILYPAD ATmega328


Compare
ARDUINO LILYPAD IN PAKISTAN
LilyPad Arduino
Main Board
The LilyPad Arduino is designed for e-textiles and wearables projects. It can be sewn to fabric and similarly mounted power supplies, sensors, and actuators with conductive thread.

 550.0  650.0

Arduino LILYPAD In Pakistan

LilyPad Arduino
Main Board
The LilyPad Arduino is designed for e-textiles and wearables projects. It can be sewn to fabric and similarly mounted power supplies, sensors, and actuators with conductive thread.

The LilyPad Arduino 328 Main Board is an Arduino-programmed microcontroller designed to be easily integrated into e-textiles and wearable projects. It offers the same functionality you find on other Arduino boards, in a lightweight, round package designed to minimize snagging and profile, with wide tabs that can be sewn down and connected with conductive thread.

The LilyPad Arduino consists of an ATmega328 with the Arduino bootloader and a minimum number of external components to keep it as small (and as simple) as possible. This board will run from 2V to 5V and offers large pin-out holes that make it easy to sew and connect. Each of these pins, with the exception of (+) and (-), can control an attached input or output device (like a light, motor, or switch).

LilyPad is a wearable e-textile technology developed by Leah Buechley and cooperatively designed by Leah and SparkFun. Each LilyPad was creatively designed to have large connecting pads to allow them to be sewn into clothing. Various input, output, power, and sensor boards are available. They’re even washable!

Note: A portion of this sale is given back to Dr. Leah Buechley for continued development and education of e-textiles and also to Arduino LLC to help fund continued development of new tools and new IDE features.

Dimensions:

  • 50mm outer diameter
  • Thin 0.8mm PCB

Documents:

MicrocontrollerATmega168 or ATmega328V
Operating Voltage2.7-5.5 V
Input Voltage2.7-5.5 V
Digital I/O Pins14
PWM Channels6
Analog Input Channels6
DC Current per I/O Pin40 mA
Flash Memory16 KB (of which 2 KB used by bootloader)
SRAM1 KB
EEPROM512 bytes
Clock Speed8 MHz
MicrocontrollerATmega168 or ATmega328V
Operating Voltage2.7-5.5 V
Input Voltage2.7-5.5 V
Digital I/O Pins14
PWM Channels6
Analog Input Channels6
DC Current per I/O Pin40 mA
Flash Memory16 KB (of which 2 KB used by bootloader)
SRAM1 KB
EEPROM512 bytes
Clock Speed8 MHz

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “Arduino LILYPAD ATmega328”

There are no reviews yet.