-3%
,

Arduino NANO V 3.0 ATMEGA328P


Compare

Arduino NANO V 3.0 ATMEGA328P

  1.  Automatic reset during program download
  2.  Power OK blue LED
  3.  Green (TX), red (RX) and orange (L) LED
  4. Auto sensing/switching power input
  5. Small mini-B USB for programming and serial monitor
  6. ICSP header for direct program download
  7.  Standard 0.1” spacing DIP (breadboard friendly)
  8. Manual reset switch

 390.0  400.0

Arduino NANO V3.0 ATMEGA328P  in Pakistan

USB to Serial Chip is CH340

Arduino Nano is a surface mount breadboard embedded version with integrated USB. It is a smallest, complete, and breadboard friendly. It has everything that Diecimila/Duemilanove has (electrically) with more analog input pins and onboard +5V AREF jumper. Physically, it is missing power jack. The Nano is automatically sensing and switch to the higher potential source of power, there is no need for the power select jumper.

Nano’s got the breadboard-ability of the Boarduino and the Mini+USB with a smaller footprint than either, so users have more breadboard space. It’s got a pin layout that works well with the Mini or the Basic Stamp (TX, RX, ATN, GND on one top, power and ground on the other).

 FEATURES:

  1.  Automatic reset during program download
  2.  Power OK blue LED
  3.  Green (TX), red (RX) and orange (L) LED
  4. Auto sensing/switching power input
  5. Small mini-B USB for programming and serial monitor
  6. ICSP header for direct program download
  7.  Standard 0.1” spacing DIP (breadboard friendly)
  8. Manual reset switch

 SPECIFICATIONS:

  1. Microcontroller: Atmel ATmega 328

  2. Operating Voltage(logic level) : 5V

  3. Input Voltage (recommended) : 7-12 V

  4. Input Voltage (limits)  : 6-20 V

  5. Digital I/O Pins: 14 (of which 6 provide PWM output)

  6. Flash Memory: 32 KB (of which 2KB used by bootloader)

  7. SRAM: 2 KB

  8. EEPROM:  1 KB

  9. Clock Speed: 16 MHz

  10. Dimensions   : 0.70” x 1.70”

RELATED DOCUMENTS:

  1. IC CH340G Datasheet Click here to Download 
  2. IC Atmel ATmega 328 Datasheet Click here to Download 

 

    1. Microcontroller: Atmel ATmega 328

    2. Operating Voltage(logic level) : 5V

    3. Input Voltage (recommended) : 7-12 V

    4. Input Voltage (limits)  : 6-20 V

    5. Digital I/O Pins: 14 (of which 6 provide PWM output)

    6. Flash Memory: 32 KB (of which 2KB used by bootloader)

    7. SRAM: 2 KB

    8. EEPROM:  1 KB

    9. Clock Speed: 16 MHz

    10. Dimensions   : 0.70” x 1.70”

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “Arduino NANO V 3.0 ATMEGA328P”

There are no reviews yet.