Sale!
,

Digispark ATTINY85 Arduino Micro USB Development Board


Compare

Digispark ATTINY85 Arduino Micro USB Development Board In Pakistan

  • Support for the Arduino IDE 1.0+ (OSX/Win/Linux)
  • Power via USB or External Source – 5v or 7-35v (12v or less recommended, automatic selection)
  • 8k Flash Memory (about 6k after bootloader)
  • On-board 500ma 5V Regulator
  • I2C and SPI (vis USI)
  • Built-in USB

 250.00  300.00

Share the product and get 10% discount!

Digispark ATTINY85 Arduino Micro USB Development Board In Pakistan

Digispark ATTiny85 USB Development Board Kickstarter Digistump Mini Arduino Comp

What is DIGISPARK ATTINY85?

The Digispark is an Attiny85 based microcontroller development board similar to the Arduino line, only cheaper, smaller, and a bit less powerful. With a whole host of shields to extend its functionality and the ability to use the familiar Arduino IDE, the Digispark is a great way to jump into electronics, or perfect for when an Arduino is too big or too much.The Digispark is shipped fully assembled except for the two included and easy to solder headers.

This is same as only difference is USB connector 

Product Specifications:

  • Support for the Arduino IDE 1.0+ (OSX/Win/Linux)
  • Power via USB or External Source – 5v or 7-35v (12v or less recommended, automatic selection)
  • On-board 500ma 5V Regulator
  • Built-in USB
  • 6 I/O Pins (2 are used for USB only if your program actively communicates over USB, otherwise you can use all 6 even if you are programming via USB)
  • 8k Flash Memory (about 6k after bootloader)
  • I2C and SPI (vis USI)
  • PWM on 3 pins (more possible with Software PWM)
  • ADC on 4 pins
  • Power LED and Test/Status LED

Software and drivers:

Instructables Click here

Arduino and Digispark

Installing Drivers and Programming


 

  • Circuit Diagram of the ATtiny85 USB Mini Development Board
  • Support for the Arduino IDE 1.0+ (OSX/Win/Linux)
  • Power via USB or External Source – 5v or 7-35v (12v or less recommended, automatic selection)
  • On-board 500ma 5V Regulator
  • Built-in USB
  • 6 I/O Pins (2 are used for USB only if your program actively communicates over USB, otherwise you can use all 6 even if you are programming via USB)
  • 8k Flash Memory (about 6k after bootloader)
  • I2C and SPI (vis USI)
  • PWM on 3 pins (more possible with Software PWM)
  • ADC on 4 pins
  • Power LED and Test/Status LED

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “Digispark ATTINY85 Arduino Micro USB Development Board”

There are no reviews yet.