, ,

Disk Read-Write Module USB Flash Disk For Arduino CH376S


Compare

Disk Read-Write Module USB Flash Disk In Pakistan

USB interface in the current electronic products accounted for a very large share of the microcontroller with USB interface communication direction of one of the most popular microcomputer application master chip module using the CH376S, CH376S is a USB bus interface chip to support USB-The hOST and USB-DEVICE/SLAVE equipment the way. Locally, CH376S with the 8-bit data bus and read, write, chip select control lines and interrupt output can be easily attached to the system bus of the microcontroller/DSP/MCU/MPU controller. USB host mode, CH375 also provides serial communication via serial input, serial output, and interrupt output monolithic/DSP/MCU/MPU connected.

This product is no longer in stock

 1,200.00

Share the product and get 10% discount!

Disk Read-Write Module USB Flash Disk In Pakistan

USB interface in the current electronic products accounted for a very large share of the microcontroller with USB interface communication direction of one of the most popular microcomputer application master chip module using the CH376S, CH376S is a USB bus interface chip to support USB-The hOST and USB-DEVICE/SLAVE equipment the way. Locally, CH376S with the 8-bit data bus and read, write, chip select control lines and interrupt output can be easily attached to the system bus of the microcontroller/DSP/MCU/MPU controller. USB host mode, CH375 also provides serial communication via serial input, serial output, and interrupt output monolithic/DSP/MCU/MPU connected.
CH375 USB device mode is fully compatible with CH372, CH376S contains all the features of the CH372. Common CH375 USB host mode support USB full-speed device, an external microcontroller can through the CH375 in accordance with the USB protocol and USB device communication. CH375 firmware also built a dedicated protocol processing Mass-Storage mass storage devices, an external microcontroller can be directly used as the basic unit of reading and writing in sectors USB storage devices (including USB hard disk/USB flash drive/U disk).
2×8 connector, easy with the MCU mount.
Jumper selectable can work in parallel or serial mode.
USB status indicator.
Onboard 3.3V LDO 1117, provides 800mA current.
A 5v power supply is powered by the target board.
12MHZ crystal.

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “Disk Read-Write Module USB Flash Disk For Arduino CH376S”

There are no reviews yet.